DLJS-X1806 Smart Manufacturing Gift Photo Frame Production System

Model: DLCIM-FL824

– Covering an area of 115.44 square meters (including channels), 15m × 8m.

-Input power: three-phase four-wire system AC380V±10% 50HZ, single-phase 220V±10% 50H.

-Working environment: temperature -10 °C – +40 °C, relative humidity <85% (25 °C), anhydrous beads condensation elevation <4000m.

-Power control: automatic air switch on and off the power supply, with over-voltage protection, under-voltage protection, over-current protection, and leakage protection system.

– Air source, 3-7bar, 670L/min.

Send Inquiry

Description

1. Overview

The photo frame processing and assembly flexible automatic production training system is composed of auto-stereo warehouse, loading manipulator, distributing manipulator, automatic transmission line, 7-axis handling robot, CNC processing unit, marking unit, 3D printing unit, assembly & detecting unit, Packing unit, process monitoring display system, MES billboard, short-distance projector, feeding cabinet, PLC console, electric control cabinet, power distribution cabinet, etc.

2. Composition Introduction

– The overall production training system covers an area of 70 square meters. Length 11.1 m and width is 6.25m

– Leave 2m pedestrian passage outside the fence.

– Reserve 2 teaching entrance & exit port.

-The safety fence is set on the protective fence. When the robot senses someone or some object passing through the working area, the entire production line will stop, and the alarm or notification will be notified and the video will be recorded.