● The training set adopt Chevrolet Cruze electronic controlled engine assembly, with complete accessories, can be used to complete various training Content of engine load. All components adopt original parts,QC strictly testified, in accordance with Production Quality Management standard of ISO9001:2008, suit for car engine structure and maintenance practical training in the medium and senior vocational schools and car training institutions, satisfy the
requirement of teaching training project on the electronic controlled engine structure, working principle, fault diagnosis, fault setting and exclusion assessment.
■ Basic Configuration
● Engine assembly, engine control unit, engine circuit plug, combination instrument , training panel, diagnostic
block,tank assembly, up and down pipe, Kettle, thermostat switch, cooling fan assembly and bracket, pressure gauge,
vacuum gauge, ignition switch, battery, starter,generator, fuel pump assembly, fuel filter, air filter, Ignition key with a
chip, intake and exhaust manifolds, catalytic assembly, oil tank, movable bench and mobile casters, general power
switch, relay and fuse box,instruction manual and user training guide etc.
● Demonstrate the engine work,run smoothly,actually refelect the EFI gasoline engine structure and working principle.
● Demonstrate engine oil pressure, vacuum pressure, oil pressure normal operating pressure
● Equipped with digit display meter to display the related sensor working static value and dynamic value.
● Training sets are equipped with electronic engine control system schematics and detection terminal, through a variety of professional instruments to detect the signal parameters of sensors, actuators etc. such as voltage, resistance,
● Equipped with diagnostic blocks can be connected to a dedicated or general-auto decoders, to complete reading fault codes of engine electronic control system, clearing fault codes, reading data stream, matching adjustment, programming, testing, testing terminal components etc engine diagnostic function.
● Fault setting and assessment system (please refer to the detailed function introduction of fault setting and
● Rotate position of training sets are equipped with safety shields to keep safe.
● Training sets equip with gasoline extinguisher and short circuit self-protection device
● With locking casters for mobile devices, easy to move for teaching
■ Training Content
● Engine sctructure and composition training
● Engine component setup position training
● Engine sensor voltage,resistence, signal testing training
● Engine fuel pressure, Vacuum pressure, oil pressure training
● Engine Schematics analysis trainging
● Engine control unit fault code reading，fault code eliminate,data flow reading, Anti-theft matching
adjustment,programming, terminal component testing training
● Engine troubleshooting and confirmation training
● Engine fault setting and exclusion training
● Engine practical operation and theoretical exam training
■ Technical Parameter.
● Engine location: front-loading
● Engine model:universal LDE
● Displacement (L):1.6
● Intake type: naturally aspirated
● The cylinder arrangement Type: L type
● The number of cylinders (months): 4
● Number of valves per cylinder (months): 4
● Valve structure: dual overhead cam (DOHC)
● Compression ratio: 10.80
● The maximum horsepower (Ps): 121
● Maximum power (kW): 89
● Maximum power speed (rpm): 6000
● Maximum torque (Nm): 155
● Maximum torque speed (rpm): 4000
● The specific technology: Ecotec DVVT
● Fuel Type: Gasoline
● The fuel grade: 93 (Beijing 92)
● Fuel method: multi-point EFI
● The head material: Aluminum
● The block material: cast iron
● Environmental standards: GB 4
● Input voltage: AC 220V
● Power supply: DC 12V
● Battery capacity: 60HA
● Fuel tank capacity: 12L
● The fuel grade: 93 #
● Operating temperature: -40 ℃ ~ + 50 ℃
● Dimensions: 1600 × 850 × 1800mm (length × width × height).